Stainless steel chain in the process of use of rust how to deal with it?
Austenitic stainless steel chain series, such as 304 and 316 and 316L materials have excellent corrosion resistance, such as acid, alkali and -40°~600° high and low temperature occasions. In comparison, 316L has a better resistance to magnetism, rigorous temperature adaptability and chemical corrosion resistance. Martensitic Stainless steel chain series, such as 2cr13, not only has the appropriate anti-corrosion capability, but also with the same carbon content of carbon steel strength. After the use of a period of time, there will often be surface rust, which also causes a lot of users headaches. However, for the stainless steel chain in the use of the process of rust, how should we deal with it?
Stainless steel chain surface removal of rust, you can use pickling paste, can improve the surface of stainless steel chain finish, in the stainless steel in operation, the pickling paste on the surface of the stainless steel chain, coating thickness of 0.5-2mm, the general reaction time is more than 3-10 minutes, 0 ℃ or oxide thickness of the use, the need to extend the appropriate time, the best treatment process with a brush scrub several times, the surface of the oxide skin completely removed, with water (lime water or alkali water better) washed, to avoid return rust, If the product appears clear water, do not fall, shake evenly or stir after use.
Stainless steel chain using high-quality products 1cr18ni9ti or SS304 stainless steel manufacturing, with acid, alkali resistance, cold, long life and so on. Widely used in food, chemical, pharmaceutical, rubber, printing, suppression wire and other machinery, and for a variety of import and export machinery supporting, is a modern equipment excellent equipment.