Tensile strength and adaptability of stainless steel chain
The stainless steel chain as a common transmission power device, through the hyperbolic arc of the "chain" design, reduce the friction, so that the power ratio of the larger and slower operation of the place, than the belt drive has obvious advantages, such as tanks, pneumatic compressors, etc., but the transmission speed can not be too fast, because the chain flexibility is not as good as belt conveyor.
Stainless steel chain and the nature of the spring, there will be a large degree of elasticity and large endurance, a lot of people will ask, his strength is determined by what? The strength should exceed the specified applied to the chain to take place bad tensile. The small tensile strength of the drum is not a chain of ' terbium. It mostly dumps data between different chains. At least five chain segments are composed of two ends of the chain, which are connected by a rotating clamp, which is allowed to be doubled along the centerline of the chain in a hinged plane.
The stainless steel chain is especially suitable for corrosion-resistant, cleaning or demanding areas of certain chemicals and for high and low temperature occasions.
Different material of stainless steel chain performance difference is very big
1, the use of quality products 1cr18ni9ti or SS304 stainless steel manufacturing, with acid, alkali resistance, cold, long life and other characteristics, widely used in food, chemical, pharmaceutical, rubber, printing, and other machinery, and other import and export machinery, is a modern equipment of fine equipment.
2, austenitic stainless steel chain series, such as 304 and 316 and 316L materials with excellent corrosion resistance, such as acid, alkali and -40°~600° high and low temperature occasions. In comparison, 316L has a better resistance to magnetism, rigorous temperature adaptability and chemical corrosion resistance.
3, martensitic stainless steel chain series, such as 2cr13, not only have the appropriate anti-corrosion capacity, but also with the same carbon content of carbon steel strength.